Most Recent Dell EMC DEE-1111 Exam Questions & Answers

During a Non-Disruptive Migration (NDM), issuing the ReadyTgt SYMCLI command to the migrating Storage Group completes the migration by removing the migrated application resources from the source array2.This command is typically issued after all data has been synchronized from the source to the target array and application I/O has been switched to the target array2.Reference:NDM overview | Dell EMC PowerMax and VMAX: Non-Disruptive Migration Best Practices and Operational Guide | Dell Technologies Info Hub

The two factors that define Capacity Management are I/O capacity and storage capacity. I/O capacity refers to the ability of the system to handle the incoming and outgoing data traffic from the hosts or applications. Storage capacity refers to the amount of disk space available to store the data. Capacity Management is the process of planning, monitoring, and optimizing the use of these resources to ensure optimal performance, availability, and efficiency of the system.

Dell EMC PowerMax: Family Overview

System Resource Usage

An SRDF/Metro device pair was in an ActiveActive state, meaning that both the R1 and R2 devices were read/write accessible to the host or hosts. A link failure between arrays occurs, causing the device pair to become Not Ready (NR) on the SRDF link. SRDF/Metro responds by making the non-biased or R2 paired device inaccessible (not ready) to the host or host cluster, while keeping the biased or R1 paired device accessible (ready). This ensures that there is no data inconsistency or split-brain scenario between the two sites. The device pair enters an Active Bias state, which indicates that only one side of the pair is active and has a bias attribute set. The bias attribute determines which side of the pair remains accessible in case of a link failure. By default, the bias is set to the R1 side of the pair, but it can be changed using the symrdf set bias command. The application continues running on the R1 side, and the link failure is addressed. Once the link is restored, the device pair resumes the ActiveActive state and both devices become accessible again.

SRDF/Metro overview

VMware vSphere Metro Storage Cluster (vMSC) with Dell PowerMax and Dell EMC VMAX SRDF/Metro

Understanding bias

The symaudit -list command is used to display audit records for SYMCLI commands. The exhibit shows the output of the symauth -list command, which displays the user groups and access types defined for SYMCLI commands. The output shows that there are two user groups: AdminGrp and EmcMgmtGrp. The AdminGrp group has ADMINRD access type, which means that users in this group can run any SYMCLI command with read-only access. The EmcMgmtGrp group has BASECONTROL access type, which means that users in this group can run only a subset of SYMCLI commands with read/write access. However, the output also shows that there are two exceptions for specific users: Beth and Frank. Beth has ADMINRD access type for all commands, which overrides her membership in EmcMgmtGrp group. Frank has BASECONTROL access type for all commands, which overrides his membership in AdminGrp group.Therefore, the only user who has access to run the symaudit -list command based on the symauth output shown in the exhibit is Beth, since she has ADMINRD access type for all commands2

In a SRDF/Metro deployment in a clustered host configuration, when the RDF link state is partitioned and the R1 side has full read/write capability to the application, the R2 device also has full read/write capability to the application. With SRDF/Metro, both R1 and R2 devices may then appear as a single virtual device across the two SRDF paired arrays for host presentation.With both the R1 and R2 devices being accessible, the host or hosts (in the case of a cluster) can read and write to both R1 and R2 devices with SRDF/Metro ensuring that each copy remains current, consistent, and addressing any write conflicts which may occur between the paired SRDF devices23.Reference:Dell EMC PowerMax and VMAX All Flash: SRDF/Metro Overview and Best Practices,Deploying Dell EMC SRDF/Metro Smart DR with Microsoft SQL Server for Physical and Virtual Environments