Limited-Time Offer: Enjoy 50% Savings! - Ends In 0d 00h 00m 00s Coupon code: 50OFF
Welcome to QA4Exam
Logo

- Trusted Worldwide Questions & Answers
Mail Us support@qa4exam.com
0
Menu

Most Recent Fortinet NSE6_FWF-6.4 Exam Dumps

 

Prepare for the Fortinet NSE 6 - Secure Wireless LAN 6.4 exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the Fortinet NSE6_FWF-6.4 exam and achieve success.

The questions for NSE6_FWF-6.4 were last updated on Feb 20, 2025.
  • Viewing page 1 out of 7 pages.
  • Viewing questions 1-5 out of 35 questions
Get All 35 Questions & Answers
Question No. 1

When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)

Show Answer Hide Answer
Correct Answer: B, D

Question No. 2

When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)

Show Answer Hide Answer
Correct Answer: A, D

The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.


When enabling security fabric on the FortiGate interface to manage FortiAPs, two types of communication channels are established between FortiGate and FortiAPs: control channels and data channels. Control channels are used for management and configuration of the FortiAPs, such as firmware updates, provisioning, and monitoring. Data channels are used for tunneling wireless traffic from the FortiAPs to the FortiGate for security inspection and policy enforcement. Reference:FortiOS 6.4.0 Handbook - Security Fabric, page 17;FortiOS 6.4.0 Handbook - Wireless Controller, page 15.

Question No. 3

Which statement is correct about security profiles on FortiAP devices?

Show Answer Hide Answer
Correct Answer: D

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic, such as antivirus, web filtering, application control, and IPS. This feature is called local bridging and it allows the FortiAP to forward traffic to the FortiGate for security inspection before sending it to the destination network. This reduces the bandwidth consumption and latency of tunnel mode SSIDs. Reference:Secure Wireless LAN Course Description, page 9; [FortiOS 6.4.0 Handbook - Wireless Controller], page 46.


Question No. 4

When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)

Show Answer Hide Answer
Correct Answer: A, D

According to the web search results, Auto TX Power control is a feature that allows the AP to automatically adjust its transmission power based on the RF environment. The goal is to minimize interference and optimize coverage cells for roaming. When the AP detects any other wireless signal stronger than -70 dBm, it means that there is a potential source of interference nearby, so it will reduce its transmission power until it reaches the minimum configured TX power limit. This will reduce the interference and improve coexistence with other devices. When the AP detects any interference from a trusted neighboring AP stronger than -70 dBm, it means that there is a high density of APs in the area, so it will also reduce its transmission power until it reaches the minimum configured TX power limit. This will balance the load and avoid overlapping coverage areas. Reference:AP Transmit Power and Enable Power Reduction with Auto TX,Transmit Power and Antenna Configuration,Meraki Auto RF: Wi-Fi Channel and Power Management


Question No. 5

When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)

Show Answer Hide Answer
Correct Answer: A, B, E

The RADIUS user attributes used for the VLAN ID assignment are:

IETF 64 (Tunnel Type)---Set this to VLAN.

IETF 65 (Tunnel Medium Type)---Set this to 802

IETF 81 (Tunnel Private Group ID)---Set this to VLAN ID.


Dynamic VLAN allocation is a feature that allows wireless clients to be assigned to different VLANs based on RADIUS attributes returned by the authentication server. The three IETF attributes that must be supplied by the RADIUS server are: 81 Tunnel-Private-Group-ID, which specifies the VLAN ID for the client; 65 Tunnel-Medium-Type, which specifies the tunneling protocol as IEEE-802 (Ethernet); and 64 Tunnel-Type, which specifies the tunneling method as VLAN. Reference:FortiOS 6.4.0 Handbook - Wireless Controller, page 60;FortiAP / FortiWiFi 6.4.0 Administration Guide, page 68.

Unlock All Questions for Fortinet NSE6_FWF-6.4 Exam

Full Exam Access, Actual Exam Questions, Validated Answers, Anytime Anywhere, No Download Limits, No Practice Limits

Get All 35 Questions & Answers
Explore Other Fortinet Exams