Most Recent Fortinet NSE7_SDW-7.2 Exam Dumps

Prepare for the Fortinet NSE 7 - SD-WAN 7.2 exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the Fortinet NSE7_SDW-7.2 exam and achieve success.

The questions for NSE7_SDW-7.2 were last updated on Feb 18, 2025.

Viewing page 1 out of 20 pages.
Viewing questions 1-5 out of 99 questions

Get All 99 Questions & Answers

Question No. 1

In which SD-WAN template field can you use a metadata variable?

AYou can use metadata variables only to define interface members and the gateway IP.

BAll SD-WAN template fields support metadata variables.

CAny field Identified with a dollar sign ($) in a magnifying glass.

DAny field identified with an 'M' in a circle.

Show Answer

Correct Answer: B

Question No. 2

Refer to the Exhibits:

Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members.

Based on the exhibits, which statement is correct?

AThe dead member interface stays unavailable until an administrator manually brings the interface back.

BPort2 needs to wait 500 milliseconds to change the status from alive to dead.

CStatic routes using port2 are active in the routing table.

DFortiGate has not received three consecutive requests from the SLA server configured for port2.

Show Answer

Correct Answer: C

Question No. 3

Refer to the exhibits.

Exhibit A -

Exhibit B -

Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.

When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.

Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?

AEnable auxiliary-session under config system settings.

BDisable tp-session-without-syn under config system settings.

CEnable snat-route-change under config system global.

DDisable allow-subnet-overlap under config system settings.

Show Answer

Correct Answer: A

Question No. 4

Exhibit.

The exhibit shows VPN event logs on FortiGate. In the output shown in the exhibit, which statement is true?

AThere are no IPsec tunnel statistics log messages for ADVPN cuts.

BThere is one shortcut tunnel built from master tunnel T_MPLS_0.

CThe VPN tunnel T_MPLS_0 is a shortcut tunnel.

DThe master tunnel T_INET_0 cannot accept the ADVPN shortcut.

Show Answer

Correct Answer: B

VPN event logs record the status of VPN tunnels, such as the establishment, termination, or failure of a tunnel. The output includes the following information:

logid: the log ID number

type: the log type, either traffic or event

subtype: the log subtype, either vpn or ipsec

level: the log level, either error, warning, or notice

vd: the virtual domain name

logdesc: the log description

msg: the log message

action: the log action, such as tunnel-up, tunnel-down, or tunnel-stats

remip: the remote IP address

locip: the local IP address

remport: the remote port number

locport: the local port number

outintf: the outgoing interface name

cookies: the IKE SA cookies

user: the user name

group: the user group name

useralt: the alternative user name

xauthuser: the XAuth user name

authgroup: the XAuth user group name

assignip: the assigned IP address

vpntunnel: the VPN tunnel name

tunnellip: the tunnel loopback IP address

tunnelid: the tunnel ID number

tunneltype: the tunnel type, either ipsec or ssl

duration: the tunnel duration in seconds

sentbyte: the number of bytes sent

rcvdbyte: the number of bytes received

nextstat: the next statistics interval in seconds

advpnsc: the ADVPN shortcut flag, either 0 or 1

Based on the exhibit, the following statement is true:

There is one shortcut tunnel built from master tunnel T_MPLS_0.This means that the VPN tunnel T_MPLS_0 is a master tunnel that can send ADVPN shortcut offers to other spokes, and the VPN tunnel T_MPLS_0_0 is a shortcut tunnel that is built from the master tunnel T_MPLS_01. In the exhibit, the log action for T_MPLS_0 is tunnel-up, and the log action for T_MPLS_0_0 is shortcut-up. The advpnsc flag for T_MPLS_0 is 0, indicating that it is not a shortcut tunnel, while the advpnsc flag for T_MPLS_0_0 is 1, indicating that it is a shortcut tunnel.

Question No. 5

Refer to the exhibit.

An administrator used the SD-WAN overlay template to prepare an IPsec configuration for a hub-and-spoke SD-WAN topology. The exhibit shows the installation preview for one FortiGate device. In the exhibit, which statement best describes the configuration applied to the FortiGate device?

AIt is a hub device. It can send ADVPN shortcut offers.

BIt is a spoke device that establishes dynamic IPsec tunnels to the hub. The subnet range is 10.10.128.0/23.

CIt is a spoke device that establishes dynamic IPsec tunnels to the hub. It can send ADVPN shortcut requests.

DIt is a hub device and will automatically discover the spoke devices that are in the SD-WAN topology.

Show Answer

Correct Answer: C

According to theSD-WAN 7.2 Study Guide, the SD-WAN overlay template simplifies the configuration of IPsec tunnels in a hub-and-spoke topology. The template defines the following parameters:

type: dynamic for spokes, static for hubs

interface: the WAN interface to use for the IPsec tunnel

network-overlay: enable for spokes, disable for hubs

network-id: a unique identifier for each spoke

auto-discovery-sender: enable for hubs, disable for spokes

auto-discovery-receiver: enable for spokes, disable for hubs

Based on the exhibit, the FortiGate device has the following configuration:

type: dynamic

interface: port1

network-overlay: enable

network-id: 5

auto-discovery-sender: disable

auto-discovery-receiver: enable

Therefore, the FortiGate device is a spoke that establishes dynamic IPsec tunnels to the hub.It also has the network-overlay and auto-discovery-receiver options enabled, which means it can send ADVPN shortcut requests to other spokes when it receives a shortcut offer from the hub

Unlock All Questions for Fortinet NSE7_SDW-7.2 Exam

Full Exam Access, Actual Exam Questions, Validated Answers, Anytime Anywhere, No Download Limits, No Practice Limits

Get All 99 Questions & Answers