Limited-Time Offer: Enjoy 50% Savings! - Ends In 0d 00h 00m 00s Coupon code: 50OFF
Welcome to QA4Exam
Logo

- Trusted Worldwide Questions & Answers
Mail Us support@qa4exam.com
0
Menu

Most Recent Fortinet NSE7_ZTA-7.2 Exam Dumps

 

Prepare for the Fortinet NSE 7 - Zero Trust Access 7.2 exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the Fortinet NSE7_ZTA-7.2 exam and achieve success.

The questions for NSE7_ZTA-7.2 were last updated on Feb 20, 2025.
  • Viewing page 1 out of 6 pages.
  • Viewing questions 1-5 out of 30 questions
Get All 30 Questions & Answers
Question No. 1

Which one of the supported communication methods does FortiNAC use for initial device identification during discovery?

Show Answer Hide Answer
Correct Answer: B

FortiNAC uses a variety of methods to identify devices on the network, such as Vendor OUI, DHCP fingerprinting, and device profiling12.One of the supported communication methods that FortiNAC uses for initial device identification during discovery is SNMP (Simple Network Management Protocol)3.SNMP is a protocol that allows network devices to exchange information and monitor their status4.FortiNAC can use SNMP to read information from switches and routers, such as MAC addresses, IP addresses, VLANs, and port status3.SNMP can also be used to configure network devices and enforce policies4.Reference:1: Identification | FortiNAC 9.4.0 - Fortinet Documentation2: Device profiling process | FortiNAC 8.3.0 | Fortinet Document Library3: Using FortiNAC to identify medical devices - James Pratt4: How does FortiNAC identify a new device on the network?


Question No. 2

Which statement is true about disabled hosts on FortiNAC?

Show Answer Hide Answer
Correct Answer: A

They are quarantined and placed in the remediation VLAN. This is a standard practice in network access control systems where non-compliant or disabled hosts are isolated in a VLAN where they can be remediated or reviewed.


Question No. 3

Which factor is a prerequisite on FortiNAC to add a Layer 3 router to its inventory?

Show Answer Hide Answer
Correct Answer: D

FortiNAC uses SNMP or CLI to communicate with network devices such as routers and switches. To add a Layer 3 router to its inventory, FortiNAC needs to have SNMP or CLI access to the router to perform remote tasks such as polling, VLAN assignment, and port shutdown. Without SNMP or CLI access, FortiNAC cannot manage the router or its ports.Therefore, SNMP or CLI access is a prerequisite for adding a Layer 3 router to FortiNAC's inventory.Reference:= https://docs.fortinet.com/document/fortinac/9.4.0/administration-guide/105927/inventory

https://docs.fortinet.com/document/fortinac/9.4.0/administration-guide/344098/l3-polling


Question No. 4

Exhibit.

An administrator has to provide on-fabric clients with access to FortiAnalyzer using ZTNA tags

Which two conditions must be met to achieve this task? (Choose two.)

Show Answer Hide Answer
Correct Answer: A, B

For on-fabric clients to access FortiAnalyzer using ZTNA tags, the following conditions must be met:

A) The on-fabric client should have FortiGate as its default gateway: This is essential to ensure that all client traffic is routed through FortiGate, where ZTNA policies can be enforced.

B) The ZTNA server must be configured on FortiGate: For ZTNA tags to be effectively used, the ZTNA server, which processes and enforces these tags, must be configured on the FortiGate appliance.


Configuring ZTNA tags and tagging rules

Synchronizing FortiClient ZTNA tags

FortiAnalyzer

Technical Tip: ZTNA Tags fail to synchronize between FortiClient and FortiGate

Question No. 5

What happens when FortiClient EMS is configured as an MDM connector on FortiNAC?

Show Answer Hide Answer
Correct Answer: C

When FortiClient EMS is configured as an MDM connector on FortiNAC, it allows FortiNAC to obtain host information from FortiClient EMS and use it for network access control. FortiNAC polls FortiClient EMS periodically (every 5 minutes by default) to update already registered hosts in FortiNAC. This ensures that FortiNAC has the latest host data from FortiClient EMS, such as device type, OS, IP address, MAC address, hostname, and FortiClient version. FortiNAC can also use FortiClient EMS as an authentication source for devices that have FortiClient installed.FortiNAC does not send any data to FortiClient EMS or check for device vulnerabilities and compliance with FortiClient123.Reference:=1: MDM Service Connectors | FortiClient EMS Integration2: FortiClient EMS Device Integration|FortiNAC 9.4.0 - Fortinet Documentation3: Technical Tip: Integration with FortiClient EMS


Unlock All Questions for Fortinet NSE7_ZTA-7.2 Exam

Full Exam Access, Actual Exam Questions, Validated Answers, Anytime Anywhere, No Download Limits, No Practice Limits

Get All 30 Questions & Answers
Explore Other Fortinet Exams