Most Recent Huawei H12-261 Exam Dumps

Prepare for the Huawei HCIE-Routing & Switching (Written) V3.0 exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the Huawei H12-261 exam and achieve success.

The questions for H12-261 were last updated on Feb 20, 2025.

Viewing page 1 out of 96 pages.
Viewing questions 1-5 out of 479 questions

Get All 479 Questions & Answers

Question No. 1

As shown in the configuration management, R1 OSPF R1, () staff configured but can not learn the routing of other routers, then the possible reason is.

[R1]ospf

[Rl-ospf-1]area 2

[R1-ospf-1-area-0.0.0.2]network 10.0.13.1 0.0.0.0

AThe area configured by this router is different from the area ID ID of its home router.

BThis router is not configured with the number OSPF

CThe router's announcement network address does not match the interface mask.

DThis router is not configured with functional authentication, but the router is configured with function neighbor authentication.

Show Answer

Correct Answer: A, D

Question No. 2

The default configuration of the switch is that the MAC A address table is empty, and the host connected to the switch connects to the first broadcast data in the change single frame, then the switch receives the change.

What will happen after the frame is executed?

AThe opportunity to discard the data and replace the frame.

BThe exchange will forward the data out of an interface frame according to the data of the frame.

CSource of the exchange data, record the frame MAC address and flood the data.

DThe opportunity to save the data to slow down the frame, waiting for the destination host to send data, then send the frame to forward

Show Answer

Correct Answer: C

Question No. 3

Subnets of different VPNs on a VXLAN network need to be accessed. The information about one subnet is as follows: RT^10:10 both and RT=1000:1000 export in the EVPN instance and RT-100:100 in the VPN instance. Which of the following configurations can be made for

another subnet?

A1000:1000 both in the EVPN instance

B1000:1000 both evpn in the VPN instance

C10:10 both in the VPN instance

D1000:1000 export in the EVPN instance

Show Answer

Correct Answer: B

Question No. 4

In the Hub-Spoke networking of MPLS BGP VPN shown in the figure below, users want to configure branches to communicate only with the headquarters but no other branches. To achieve this, which of the following solutions regarding RT settings can be used?

AHeadquarters: Import Target: 2:2; Export Target: 3:3Branch 1: Import Target: 3:3; Export Target: 1:1Branch 2: Import Target: 3:3; Export Target: 2:2

BHeadquarters: Import Target: 12:3; Export Target: 3:12Branch 1: Import Target: 3:12; Export Target: 12:3Branch 2: Import Target: 3:12; Export Target: 12:3

CHeadquarters: Import Target: 1:1; Export Target: 3:3Branch 1: Import Target: 3:3; Export Target: 1:1Branch 2: Import Target: 3:3; Export Target: 2:2

DHeadquarters: Import Target: 12:3; Export Target: 12:3Branch 1: Import Target: 12:3; Export Target: 12:3Branch 2: Import Target: 12:3; Export Target: 12:3

Show Answer

Correct Answer: B

Question No. 5

As shown in the figure, the following method is correct.

AIf the R2 Ethernet0/0/1 is down, R1 BFD, and R1 OSPF down, the fault can be quickly detected and notified.

BOSPF FULL, BFD UP status changes to trigger the session

CIf the interface R2 Ethernet0/0/0 is down, the next hop of the route arrived by R1 10.0.2.2 10.0.21.2 is changed to

DIf R2 BFD is turned off, R1 BFD is down, ospf down is closed, and the message will be changed to guide neighbor relationship.

EIf the interface R2 Ethernet0/0/1 is down, the next hop of the route that arrives at R1 10.0.2.2 10.0.12.2 is changed to

Show Answer

Correct Answer: A, D

Unlock All Questions for Huawei H12-261 Exam

Full Exam Access, Actual Exam Questions, Validated Answers, Anytime Anywhere, No Download Limits, No Practice Limits

Get All 479 Questions & Answers