Most Recent Nokia 4A0-108 Exam Dumps

Prepare for the Nokia Multicast Protocols exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the Nokia 4A0-108 exam and achieve success.

The questions for 4A0-108 were last updated on Feb 18, 2025.

Viewing page 1 out of 49 pages.
Viewing questions 1-5 out of 247 questions

Get All 247 Questions & Answers

Question No. 1

What is the purpose of exchanging the Register messages between RPs configured within one anycast RP-set?

ATo inform each RP about all multicast sources in the domain.

BThere is no need for this. This is purely an optional functionality as described in the anycast RP draft.

CTo inform each RP about all multicast-enabled receivers.

DTo facilitate the anycast RP election process.

Show Answer

Correct Answer: A

Question No. 2

When forwarding a multicast frame, normal behavior for a LAN switch (with IGMP snooping enabled) is to forward the frame as if it were:

AA unicast frame with a known destination in the forwarding table.

BA unicast frame with an unknown destination in the forwarding table.

CA unicast frame with a known source in the forwarding table,

DA unicast frame with an unknown source in the forwarding table.

Show Answer

Correct Answer: A

Question No. 3

When a router receives a multicast packet, which action will it perform first?

AThe router will determine if it is the DR for that segment

BThe PIM source group database will be checked for the matching group

CA PIM Assert message will be sent to the RP

DAn RPF check will be performed on the packet

EAn IGMP join will be sent to the source

Show Answer

Correct Answer: D

Question No. 4

Click the exhibit.

If the configuration shown is applied to all PE routers, and all other configuration is complete, how many neighbors are displayed in the output of the command "PE1= show router 100 pirn neighbor"?

AThere is one PIM neighbor.

BThere are two PIM neighbors.

CThere are three PIM neighbors.

DThere is no PIM neighbor in router 100. All the PIM neighbors are in the base router.

Show Answer

Correct Answer: B

Question No. 5

What are the first two actions a router performs after PIM is enabled?

ABSR election followed by DR election.

BDR election followed by PIM Hello messages.

CDR election followed by BSR election.

DBSR election followed by PIM Hello messages.

EPIM Hello messages followed by BSR election.

FPIM Hello messages followed by DR election.

Show Answer

Correct Answer: F

Unlock All Questions for Nokia 4A0-108 Exam

Full Exam Access, Actual Exam Questions, Validated Answers, Anytime Anywhere, No Download Limits, No Practice Limits

Get All 247 Questions & Answers