Most Recent Riverbed 830-01 Exam Dumps

Prepare for the Riverbed RCPE Certified Professional WAN Optimization exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the Riverbed 830-01 exam and achieve success.

The questions for 830-01 were last updated on Mar 31, 2025.

Viewing page 1 out of 80 pages.
Viewing questions 1-5 out of 402 questions

Get All 402 Questions & Answers

Question No. 1

A SteelHead is running RiOS v8.6 and has an inpath0_0 IP address of 192.168.1.10. It is later upgraded from v8.6 to v9.0. As part of an IT project, the inpath0_0 IP address is changed to 10.10.10.10 and the configuration saved. Some time passes and the administrator decides to revert to RiOS v 8.6. It hasn't been factory reset. The appliance boots and the Management Console User Interface is reachable, however, optimization no longer works. What has happened?

AThe web GUI SSL certificate is no longer trusted and the services require a restart.

BThe licenses are no longer valid and will need to be replaced and the services restarted.

CIt is not possible to revert to older versions of RiOS and the optimization service has stopped as a precaution.

DThe configuration has reverted to the one running under v8.6 and the inpath0_0 IP address is back to 192.168.1.10.

EThe configuration has been lost and the appliance is running factory default settings.

Show Answer

Correct Answer: D

Question No. 2

A parallel SteelHead deployment between datacenters is being discussed by a customer and an Integrator. The customer would like to configure connection forwarding between the SteelHeads in two datacenters with 20 ms RTT between them. What would be the possible outcome, if the nearest branch SteelHead is 40 ms away?

AThe latency between the Neighbor SteelHeads will mean that Connection Forwarding will not come up.

BAll asymmetrically routed traffic will suffer from increased latency from the nearer branches.

CThe Nagle algorithm timer can be adjusted so as to mitigate the symptoms from the closer branches.

DThere will be little or no impact as it only affects the initial connection.

ESuboptimal performance only from HTTP traffic due to increased connection times.

Show Answer

Correct Answer: B

Question No. 3

You can monitor your Steelhead appliance disk performance using which reports? (Select 2)

AData Store Cost

BData Store Performance

CDisk Load

DSDR Hit

EDisk Pressure

FDisk Alarm

Show Answer

Correct Answer: A, C

Question No. 4

A customer noticed that after deploying the Steelhead between their switch and router, OSPF takes much longer to re-converge after the router fails. Which RiOS feature can you enable to reduce the convergence time?

AAdjusting the OSPF ''keep-alive'' timers on the Steelhead appliance

BConfigure Fail-To-Block on the Steelhead appliance

CEnable Link State Propagation

DEnable Link State Notification

EConfigure Rapid Spanning Tree on the Steelhead appliance

Show Answer

Correct Answer: C

Question No. 5

Using an Interceptor appliance is an alternative to what network designs? (Select 2)

AWCCP

BPBR

CConnection Forwarding

DFixed-target rules

EPeering rules

Show Answer

Correct Answer: A, B

Unlock All Questions for Riverbed 830-01 Exam

Full Exam Access, Actual Exam Questions, Validated Answers, Anytime Anywhere, No Download Limits, No Practice Limits

Get All 402 Questions & Answers