Most Recent RUCKUS RCNI Exam Dumps

Prepare for the RUCKUS Certified Networking Implementer exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the RUCKUS RCNI exam and achieve success.

The questions for RCNI were last updated on Feb 18, 2025.

Viewing page 1 out of 11 pages.
Viewing questions 1-5 out of 54 questions

Get All 54 Questions & Answers

Question No. 1

Which configuration steps will add untagged ethernet ports 1/1/1 and 1/1/2 and tagged ethernet port 1/2/1 to VLAN 10?

Auntagged ethernet 1/1/1 to 1/1/2 vlan 10
tagged ethernet 1/2/1 vlan 10

Buntagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1
vlan 10

Cvlan 10
no tagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1

Dvlan 10
untagged ethernet 1/1/1 to 1/1/2
tagged ethernet 1/2/1

Show Answer

Correct Answer: D

Question No. 2

The root bridge is connected to another switch over two independent 10Gbe links. Which link will remain in a forwarding state on both sides?

Athe link with the lowest port number on the non-root switch

Bthe link with the lowest port number on the root switch

Cthe link with the highest port number on the root switch

Dthe link with the highest port number on the non-root switch

Show Answer

Correct Answer: B

Question No. 3

Which command will provide a maximum 15.4W to the connected Power over Ethernet (PoE) device?

AICX(config-if-e1000-1/1/1)#inline power power-by-class 5

BICX(config-if-e1000-1/1/1)#inline power power-by-class 2

CICX(config-if-e1000-1/1/1)#inline power power-by-class 3

DICX(config-if-e1000-1/1/1)#inline power power-by-class 4

Show Answer

Correct Answer: C

Question No. 4

When running FastIron SPS08095e code, which step is required to define static routes?

AChange the ICX image version to SPR08095e.bin.

BInstall the L3-prem license.

CRun the UFI code image for GZR08095h.

DUpgrade to version SPS08095h or later.

Show Answer

Correct Answer: A

Question No. 5

Why is the following command failing?

RKUS-01(config)#vlan 1

RKUS-01(config-vlan-1)#tagged ethernet 1/2/1

Invalid input -> tagged ethernet 1/2/1

Type ? for a list

AThis model ICX does not have an interface Ethernet 1/2/1.

BThe default VLAN cannot be tagged to any interfaces.

CVLAN 1 must be configured as a protocol-based VLAN before tagged ports can be added.

DA Virtual Ethernet interface must be defined before a tagged port can be added.

Show Answer

Correct Answer: B

Unlock All Questions for RUCKUS RCNI Exam

Full Exam Access, Actual Exam Questions, Validated Answers, Anytime Anywhere, No Download Limits, No Practice Limits

Get All 54 Questions & Answers