Most Recent SCP SC0-411 Exam Questions & Answers

Prepare for the SCP Hardening the Infrastructure exam with our extensive collection of questions and answers. These practice Q&A are updated according to the latest syllabus, providing you with the tools needed to review and test your knowledge.

QA4Exam focus on the latest syllabus and exam objectives, our practice Q&A are designed to help you identify key topics and solidify your understanding. By focusing on the core curriculum, These Questions & Answers helps you cover all the essential topics, ensuring you're well-prepared for every section of the exam. Each question comes with a detailed explanation, offering valuable insights and helping you to learn from your mistakes. Whether you're looking to assess your progress or dive deeper into complex topics, our updated Q&A will provide the support you need to confidently approach the SCP SC0-411 exam and achieve success.

The questions for SC0-411 were last updated on Nov 19, 2024.

Viewing page 1 out of 115 pages.
Viewing questions 1-5 out of 574 questions

Get All 574 Questions & Answers

Question No. 1

What is the loopback address used for IPv6?

A127.0.0.1

B127:0:0:1

Cff::1

D:f:1

E::1

Show Answer

Correct Answer: E

Question No. 2

Recently you feel your network has been attacked by people sending out of spec packets to your firewall in order to get past the firewall rules. You have decided that you will capture all the packets on the firewall segment with network monitor to analyze the TCP headers for proper use. If you capture a packet that is the second part of a legitimate three way handshake, with a SEQ of 0xF8ADCCEA and an AQK of 0xD36077B0, what will the responding host send back in packet three of the three way handshake?

ASEQ 0xD36077C9, ACK 0xF8ADCCEB

BSEQ 0xD36077B0, ACK 0xF8ADCCEB

CSEQ 0xD36077B1, ACK 0xF8ADCCEB

DSEQ 0xD36077C9, ACK 0xF8ADCCE0

ESEQ 0xD36077B0, ACK 0xF8ADCCE0

Show Answer

Correct Answer: B

Question No. 3

In order to properly manage the network traffic in your organization, you need a complete understanding of protocols and networking models. In regards to the 7-layer OSI model, what is the function of the Data Link Layer?

AThe Data Link layer allows two applications on different computers to establish, use, and end a session. This layer establishes dialog control between the two computers in a session, regulating which side transmits, plus when and how long it transmits.

BThe Data Link layer manages logical addresses. It also determines the route from the source to the destination computer and manages traffic problems, such as routing, and controlling the congestion of data packets.

CThe Data Link layer packages raw bits from the Physical (Layer 1) layer into frames (structured packets for data). Physical addressing (as opposed to network or logical addressing) defines how devices are addressed at the data link layer. This layer is responsible for transferring frames from one computer to another, without errors. After sending a frame, it waits for an acknowledgment from the receiving computer.

DThe Data Link layer transmits bits from one computer to another and regulates the transmission of a stream of bits over a physical medium. For example, this layer defines how the cable is attached to the network adapter and what transmission technique is used to send data over the cable.

EThe Data Link layer handles error recognition and recovery. It also repackages long messages, when necessary, into small packets for transmission and, at the receiving end, rebuilds packets into the original message. The corresponding Data Link layer at the receiving end also sends receipt acknowledgments.

Show Answer

Correct Answer: C

Question No. 4

You are configuring the IP addressing for your network. One of the subnets has been defined with addresses already. You run ifconfig on a host and determine that it has an address of 172.18.32.54 with a mask of 255.255.254.0. What is the network ID to which this host belongs?

A172.18.0.0

B0.0.32.0

C172.0.0.0

D172.18.32.32

E172.18.32.0

Show Answer

Correct Answer: E

Question No. 5

After you have created your contingency plan, it is critical that the plan be tested. What are the three general types of plan testing that you could use?

ABackup Test

BRecovery Test

CChecklist Test

DWalk-through Test

EFull Interruption Test

Show Answer

Correct Answer: C, D, E

Unlock All Questions for SCP SC0-411 Exam

Full Exam Access, Actual Exam Questions, Validated Answers, Anytime Anywhere, No Download Limits, No Practice Limits

Get All 574 Questions & Answers